*NAILERS*

The SN883CH34 strip SuperFramer shoots a wide range of fasteners from 2-Inch by 0.113-Inch to 3-1/4-Inch by 0.131-Inch 34-Degree paper collated nails. The SN883CH34 features our patented maintenance free end cap filter, weighs only 6.8-Pound, comfortable rubber grip, reduced recoil engineering system, pointy teeth on contact arm, trigger lock lever and our anti double fire trigger mechanism (US patent 5597106). The tool can be contact or single fire with no adjusents to the tool pull trigger then depress contact arm and the tool will contact fire to single fire first depress contact arm then pull and hold trigger tool cannot fire second nail until trigger is released and tool can cycle.

With the HIDfast Decker, you can stay on your feet and install boards quickly. You can install 8 deck boards in just 3 minutes. 100 sq. ft. = 10 minutes Directions: Place two 25 peice clips into HIDfast Decker. Place the Decker at the edge of deck board at each joist and lightly strike rubber trigger cap on Decker tool. ONe fastener per joist. Hammer the next deck board onto the short point of the fastener. For use with square edge, single or double groove and double groove. Designed for AZEK DECKING but may also be used with the following deckign types: •Square edge: Azek decking, cedar, cypress, fir, mahogany, redwood, purewood or other thermally modifed decking •Single or double groove: Cedar, cypress, fir, mahogany, redwood, purewood or other thermally modified decking, pvc decking •Double groove: Batu, garapa gold, IPE, Teak and similar wood types, composite decking Use HF2.5 or HF3 fasteners. For composite decking use only HF2.5. All grooved boards require the use of tool attachment #1000016 NOTE: MUST USE HIDfast NAILS. SINGLE PACK CONTAINS 175 STAINLESS STEEL FASTENERS. NOT INCLUDED. Additional Information Package Quantity contains: 1 pneumatic gun, 1 hammer tool, 1 safety glasses, 1 bottle lubrication For more information and video of how HIDfast works please visit the "Featured Products" page at www.fastenerexpressinc.com

Introducing the newest tool to the HIDfast Family. EDGEfast. Place it once and shoot it twice. Comes with gap spacer plates that easily install onto the tool in under a minute. Gap spacer plates are 0",1/8",3/16" & 1/4". Tool holds 4 clips of 25 fasteners each. Please visit www.hidfast.com for installation information.

The MAX CN445R3 super roofer is a top of the line professional grade pneumatic roofing nailer. The applications for the CN445R3 include fastening asphalt and fiberglass shingles, fastening lath wire to plywood, the installation of siding, and wooden box assembly. MAX patented maintenance free end cap filter prevents foreign substances from entering the tool helping internal parts last longer, requiring less maintenance on the tool. Tar resistant nose designed to resist tar 4x longer than conventional tools. Full round head driver blade for better holding power. Magnet holds the last nail in place to prevent the tool from jamming. Dial adjustable depth control allows depth adjustment with no special tool. Tangle free swivel plug. Shoots from ¾”- 1 ¾” 15 degree coil nails.

The BECK INVISIDECK F36 Pneumatic Installation gun is the fastest way to install hidden fasteners into grooved decking. The tool features a unique nose piece that holds the hidden fasteners in the correct position every time, firing a screw nail, “Scrail”, through the clip into the joist – fastening the deck board to the joist in one step. On average, this installation gun will install about 400 sq. ft of decking in an hour. This is the same tool as the Tigerclaw & Concealoc deck installation tool.