With the HIDfast Decker, you can stay on your feet and install boards quickly. You can install 8 deck boards in just 3 minutes. 100 sq. ft. = 10 minutes Directions: Place two 25 peice clips into HIDfast Decker. Place the Decker at the edge of deck board at each joist and lightly strike rubber trigger cap on Decker tool. ONe fastener per joist. Hammer the next deck board onto the short point of the fastener. For use with square edge, single or double groove and double groove. Designed for AZEK DECKING but may also be used with the following deckign types: •Square edge: Azek decking, cedar, cypress, fir, mahogany, redwood, purewood or other thermally modifed decking •Single or double groove: Cedar, cypress, fir, mahogany, redwood, purewood or other thermally modified decking, pvc decking •Double groove: Batu, garapa gold, IPE, Teak and similar wood types, composite decking Use HF2.5 or HF3 fasteners. For composite decking use only HF2.5. All grooved boards require the use of tool attachment #1000016 NOTE: MUST USE HIDfast NAILS. SINGLE PACK CONTAINS 175 STAINLESS STEEL FASTENERS. NOT INCLUDED. Additional Information Package Quantity contains: 1 pneumatic gun, 1 hammer tool, 1 safety glasses, 1 bottle lubrication For more information and video of how HIDfast works please visit the "Featured Products" page at www.fastenerexpressinc.com

Package Quantity 175 3" with ("1/8") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details. PLEASE NOTE: THE HF2.5 FASTENERS HAVE CHANGED TO THE CODE ABOVE. THEY ARE NO LONGER AVAILABLE IN 2 1/2" LEG.

Package Quantity 175 3" with ("3/16") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details.

Package Quantity 175 2-1/2" with ("1/8") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available.

Package Quantity 175 2-1/2" with ("1/4") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details.

Accessory attachment to use when you’re installing pre-grooved decking. The attachment mounts to the back of the tool and registers the level of the fastener precisely off the joist surface rather than the top of the decking. By adjusting the attachment up or down, you can fire fasteners with the spur at the precise height off the joists to match the groove height on the deck boards. You’ll need this when installing dense composite decking and hardwoods to save the difficulty driving the oncoming decking onto the fastener spurs. Some builders leave the accessory attachment on my HIDfast tool and don’t find it interferes with standard operation.